Wood Plastic Composite DIY tile

Go down

Wood Plastic Composite DIY tile

Post  Admin on Sun Jun 17, 2012 10:00 pm

In most installations, a span of 60cm on center using a minimum of 3 joists will provide excellent results. Please refer to Table 1 of PERTH® Decking Span Chart (1)' and Table 2 of PERTH® Decking Span Chart (2)' . Wood plastic composite decking

1. S tainless steel or nickel-plated nails or screws are highly recommended to take full advantage of the durability of PERTH® WPC lumber.

2. More force is required to drive a nail into PERTH® WPC lumber than regular wood. Hold nail while hammering until it is driven 1.5cm to 2cm . Hitting a nail with full force when it is not driven in may cause it to fly out. Nail guns work very well with PERTH® WPC lumber.

3. For cold weather installations or when using wood screws or lag bolts, pre-drilling may be necessary. Do not drill holes any larger than 3/4 of the screw/bolt diameter.

4. Most screws will cause PERTH® WPC lumber to "mushroom" up over the screw head. Simply tap down with a hammer to hide the fastener or pre-drill to reduce the "mushroom" effect.

5. To the kind of PERTH® WPC whose width is more than 10cm , two nails or screws should be used at the same position. composite decking

Wood Plastic Composite DIY tile is manufactured from a combination of plastic, natural fiber and some additives using special equipments. It mixes natural fiber and plastic perfectly to keep the natural impression of wood but with rich colors.

Deck25 composite decking extends the sun lounge of Ballaghboy Lodge guest house in Ballinafad, Co Sligo. The Deck25 low maintenance composite decking and handrail system will never have to be painted or treated, looks fantastic and adds to the beauty of the Lodge blending comfortably into its natural surroundings.

Overlooking Lough Arrow, in picturesque County Sligo, Ballaghboy Lodge guest house rests about 1 mile from the water's edge. A favourite retreat for writers, artists and musicians, this farm guest house offers a place for quiet inspiration, with a breathtaking view of the Shannon Way.

The following are profiles of corrugated panels for roofing, flooring and siding used as a frame to pour concrete over. They are available in stainless steel and galvanized steel. Custom shapes can be made to meet your specifications. Fax specs to (804) 285-0780 or call (800) 825-0717. Also, please view our detailed specs of each profile by either clicking on the name of each individual line drawing or by viewing our products & services page. What are wood plastic composite

Admin
Admin

Posts : 146
Join date : 2012-03-05

View user profile http://woodplasticcomposite.longluntan.com

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum